ABB Offshore Systems Ltd is an ABB Oil, Gas & Petrochemical Company. The company needed a special connector that would act as a secondary containment barrier in an offshore bore hole while also enabling the passage of electrical signals through the penetrator.
Match existing interface
Advanced production and sealing
Sub-sea connectors already present an engineering challenge for manufacturers. ABB’s brief was especially demanding as it involved welding precision glass to metal seals into a high strength housing while maintaining hermeticity. The positional tolerances, especially the outside diameter of the penetrator, were therefore especially critical due to the required interference fit into the housing.
Our in-house design team tested a variety of design iterations with finite element analysis, incorporating thermal shock to give us a better understanding of the effects of the subsequent assembly process so we could anticipate and investigate potential problems.
Once we had agreed on the final design the unit was manufactured and tested. Members of the ABB team were on hand during all of the key qualification stages to see how the part would stand up to the simulated environmental conditions.
|Size||The unit had a typical diameter of 52mm with an overall length of 58mm|
|Pin count||8 contacts|
|Encapsulant||Stycast 3050 (low viscosity)|